Shop
Showing 31–45 of 99 results
-
Iwaki Pumps
EWN
The Iwaki series EWN pumps are electronically controlled electrovalves driven units of measurement capable of very accurate and easy to control chemical dosing. Manual, semi-automatic or fully automatic control is possible by combining the appropriate flush-mounted control modules.
SKU: n/a -
Iwaki Dosing Pumps, Iwaki Pumps
EZ Series 23.8 L / H @ 150 PSI
EZ series
solenoid metering pumps – Control: Start / Stop (ON / OFF)Electromagnetic Dosing Pumps – EZ Series
This economical version allows precise dosing at the lowest cost. Manual operation or simple on-off remote control for conventional liquid injections.
EZ pumps benefit from the major advantages of the range and bring precision and reliability.
Solenoid metering pump EZ – High frequency of injection
With its injection rate reaches 360 beats per minute dosage is more regular.Solenoid metering pump EZ – High accuracy
The accuracy of the flow rate is roughly 2%. Linearity is held within a range of plus or minus 3%. The frequency of injection is maintained at plus or minus 1%.Solenoid metering pump EZ – Compact
Ideal for integrators, pumps EZ series are small in size, lightweight and silent.Solenoid metering pump EZ – Double ball valve
The ball sets, seat and guide provide a complete seal and ensure the precision and good performance boot.Electromagnetic metering pump EZ – Long Membrane
The membrane, PTFE on EPDM is molded on a steel core. A membrane reinforcement minimizes flow variations if pressure changes.
SKU: n/a -
-
-
Iwaki Dosing Pumps, Iwaki Pumps
High Viscosity Series 15.0 L / H @ 73 PSI
The EH-HV series is specifically designed to handle high viscosity chemicals up to 20,000 cps. Equipped with springs and stainless steel balls.
Specialist supplier of water treatment equipment in
metering and volumetric pumps Series HV (High Viscosity)
– Controls: Start / Stop (ON / OFF) – 4-20 mA – pulse input – Stop / Start external
EH VH-series Designed specifically to inject precisely high viscosity chemicals.Equipped with sturdy materials, PVC heads and stainless steel springs for check valves, the HV series is designed to give an action to these valves, a precise and durable performance.
Designed to pump with high precision products at 20,000 cps (unit of viscosity).
The HV series is available in two models:
EWN-R-HV: 8.69 l / h to 73 PSI
EHE-HV: 15.12 l / h to 50 PSIIts exclusive two-year warranty on the entire pump, the EH-HV series is the perfect solution for your high viscosity applications.
SKU: n/a -
-
Uncategorized
Industrial Controllers
Take Control Now and Connect with the Best!
The Walchem Controllers W100, W600 and Web Master series provides reliable, flexible and powerful control for your water treatment program.
Key Features:
- W600 with large touchscreen display with icon based programming makes setup easy
- Universal sensor input provides extraordinary flexibility; the same controller can be used with almost any type of sensor needed
- Optional dual analog (4-20 mA) input for Fluorometers or nearly any other process value
- Multiple language support allows simple setup no matter where your business takes you
- Sebera control outputs allow the controller to be used in more applications
- Economical wall-mount package for easy installation
- On-screen graphing of sensor values and control output status
- Complete flexibility in the function of each relay:
- On/Off Setpoint
- Time Proportional Control
- Pulse Proportional Control (when purchased with solid-state relays)
- In-Range or Out-of-Range activation
- Probe wash
- Timer-based activation
- Activation based upon the state of a contact closure
- Timed activation triggered by Water Contactor / Paddlewheel flow meter’s accumulated total flow
- Activate with another output
- Activate as a percent of another output’s on-time
- Alarm
- For Cooling Tower and Boiler applications:
- Biocide Timer
- Boiler blowdown on conductivity using intermittent sampling
- Datalogging
- Ethernet option for remote access via the Internet or LAN
Established clientele:
- Wastewater Control
- Polymer System (flocculant) solutions
- Biocide Injection System
- Anti foam injection system
- Coagulant injection system
- felt conditioning on pulp & paper machines
- Injection feed systems (chemical skids systems)
- Disinfection, pH, ORP and conductivity analysis
- Polymer System wet end of paper machines
SKU: n/a -
Iwaki Air, Iwaki Air Pump
Looped C 1/4 “TC-X030 Series (PVDF / PTFE only)
The TC-X030 Series compact pumps offer minimal flow rates and feature the new Looped C ™ Air Motor Technology (patent pending).
Maximum Flow Rate: 2.1 GPM (8.0 LPM) Maximum Discharge Head: 230 FT (70 m) Available in: PVDF Spool Valve type: Looped C-Spring Valve Certifications: CE, ATEX Specifications
Material Code: VT Max Flow Rate: 2.1 GPM (8.0 LPM) Max Operating Pressure: 100 PSI (0.7 MPa) Max Air Consumption: 8.83 scfm (250 L / min) Supply Air Pressure Range: 30-100 PSI (0.2 – 0.7 MPa) Liquid Discharge Volume per Cycle: 0.5 oz (15 ML) Connection Size (Suction x Discharge): NPT 1/4 “ Weight: 3.7 lbs (1.7 kg) Pump Body Material Code :
V- PVDF (Kynar)
Diaphragm material options:
T PTFE (Teflon®)
Teflon® is a registered trademark of DuPont
Kynar® is a registered trademark of ArchemaSKU: n/a -
Iwaki centrifugal Mag drive pumps
Motor 1/2 to 5 HP Max. 500 L / min
Centrifugal pumps with magnetic drive – self-priming
pumps of the series SMX- (F) are centrifugal pumps with magnetic drive self-priming horizontal-type made of polypropylene or ETFE no metal parts in contact with the liquid. These pumps have a separation system to automatically evacuate air from the liquid and do not require priming pots or foot valves. They have a fast priming system and high performance. These pumps offer superior dry resistance to standard self-priming pumps.Maximum capacity: Up to 500 L / min
Magnetic Pump SMX-F – Self-priming Pump
This magnetic drive pump, made without any metal parts in contact with the liquid, is self priming. It is sufficient to initially fill the reserve of liquid integrated in the pump body to ensure priming.
Magnetic Pump SMX-F – Simple constructionThe main parts of this magnetic pump are common to the MX series (-F). The small quantity of parts makes it easier to maintain and manage spare parts.
Magnetic Pump SMX-F – Chemical ResistanceThe parts of the wetted part are made of polypropylene filled with glass fibers, ETFE filled with carbon fibers, ceramic, carbon and other materials also resistant to corrosion. The SMX series of magnetic pumps can be used for a wide range of chemicals.
SKU: n/a -
Iwaki centrifugal Mag drive pumps
Motor 1/2 to 5 HP Max. 600 L / min
The pumps of the MXM series complete the range of process pumps and thus offer an additional choice in the range of centrifugal pumps with magnetic drive. The new MXM series offers the technical characteristics needed for a chemical pump, such as corrosion resistance, durability and safety.
Maximum capacity: Up to 605 L / min
The MXM series pumps complete the range of process magnetic pumps and enable IWAKI to offer an additional choice in its range of centrifugal pumps with magnetic drive.
MXM Magnetic Pump – Improved resistance to harsh operating conditionsThe “no contact” system and the “radial flow” construction improves dry running resistance and operation at low suction conditions.
Magnetic Drive Pump MXM – non-contact system
as conventional centrifugal pumps magnetic drive, the MXM series is scheduled to avoid contact with the bearing backstop during operations or dry air to the suction inlet. Thanks to this system, the risks of friction and heating with the melting of plastic materials are eliminated.Magnetic pump MXM – Construction “radial flow” (International Patent)
The principle of the radial movement of the magnetic pump allows circulation of the liquid between the shaft and the bearing through holes in the turbine and the magnetic capsule. This prevents heating due to friction between the shaft and bearing. As a result, thermal deformation is avoided.Magnetic pump MXM – exceptional corrosion resistance
The series of magnetic pumps MXM employs optimum corrosion materials such as ETFE reinforced carbon fiber (CFRETFE). High quality ceramic and carbon are used for the parts coming into contact with the liquid. The most appropriate turbine size and engine power can be selected according to the properties of the pumped liquid.Magnetic Drive Pump MXM – Robust Construction
The body forward CFRETFE a reinforcement iron. The assembly is intended to withstand high stresses for use in cement process.Magnetic Drive Pump MXM – Enhanced security
The rear body of the magnetic pump MXM features a unique design in its manufacture to resist deformation. A reinforcement of rear body makes it possible to increase the resistance to the hydraulic pressure and the mechanical forces on the support of the axis. The safety is thus reinforced by preventing the deformation of the rear body and the leakage of liquid.SKU: n/a
