Series IX 302.8 L / H @ 145 PSI
Save on a technologically advanced motor, the IX series gives an accuracy of ± 1% over its entire dosage range. Comes with several control methods, 70% energy saving and several other benefits
Measuring and Volumetric Pumps Series IX
- Control: Pulse input – 4-20 mA – Batch mode – and much more
Measuring and Volumetric Pumps Series IX
- Control: Pulse input – 4-20 mA – Batch mode – and much more
The engine control adjusts the suction and discharge speeds to achieve a complete coverage ratio of 750: 1 (300 L / h to 200 mL / h).
Maintains accurate flow rates, allowing a low cost, mechanically driven membrane pump to achieve a high accuracy of ± 1% over its entire dosage range.
Helical gears and return springs reduce energy consumption by up to 70% compared to conventional motorized dosing pumps.
The fixed stroke length maintains a high compression ratio in each stroke resulting in rapid priming and eliminates the possibilities of defusing.
The position of the control module can be controlled in 6 different positions for convenience and ease of use with the operators.
Related products
-
Iwaki Pumps
EWN
The Iwaki series EWN pumps are electronically controlled electrovalves driven units of measurement capable of very accurate and easy to control chemical dosing. Manual, semi-automatic or fully automatic control is possible by combining the appropriate flush-mounted control modules.
SKU: n/a -
Iwaki Dosing Pumps, Iwaki Pumps
Series EWN-Y + flow meter EFS
The EWN-Y series electromagnetic metering pump combined with EFS flow sensor provides accurate real-time control and flow display.
Dosing and metering pumps EWN-Y Series + EFS
– Control: Start / Stop (ON / OFF) – 4-20 mA – pulse input – Stop / Start external – Flow Verification – alarm relayThe new EWN-Y electromagnetic metering pump combined with EFS flow sensor provides accurate real-time control and flow display.
The required flow rate is simply entered into the pump. Thanks to feedback from the EFS sensor, the pump constantly adjusts its speed to maintain the dosage even under changing conditions of pressure, temperature, viscosity, suction or discharge.
The EFS is mounted directly on the pump and allows the digital display of the dosage per minute or per hour without any calibration.The EWN-Y allows the sending of a proportional signal 4-20mA of the dosage, as well as the display of the operating history such as the total volume injected and the volume of liquid consumed over time.
SKU: n/a -
Iwaki Dosing Pumps, Iwaki Pumps
EHE Series 75.7 L / H @ 150 PSI
The EHE series have capacities up to 20 gallons per hour at 150 PSI. Combining performance and an adjustment ratio of 1800: 1, one of the most versatile pumps on the market today.
Metering and volumetric pumps EHE Series
– Control: Start / Stop (ON / OFF) – 4-20 mA – pulse input – Stop / Start externalSolenoid metering pump
This new series of metering and volumetric pumps can achieve a rate of 1.25L / min and, thanks to the integrated microprocessor, to manage a wide variety of current signals or pulses.Metering and volumetric pump EH E – High Resolution
The volume injected is adjusted by means of frequency (between O and 360 strokes) and stroke length (20 to 100%), which makes possible a wide range of flow rates.Metering and volumetric pump EH E – Integrated Microprocessor
The controller includes a microprocessor that allows four operating modes (manual, proportional divider and multiplier).Dosing and volumetric pump EH E – Controller functions
Manual
The injection rate is increased or decreased by one stroke / minute in the range from 0 to 360. This setting can be carried out either on or off.
Proportional
The injection rate can be controlled by a flow of continuous type, 4-20mA, 0-20mA, 20-4 mA, 20-0mA.Divider
in response to (n) pulses, the metering pump makes an injection. The number of pulses to be received is set by the keys between 1 and 999.Multiplier
In response to a pulse, the dosing pump performs (n) injections. The number of injections is set by the keys between 1 and 999. The pump is able to memorize the pulses which occur during the execution of the previous command (maximum 250 pulses).SKU: n/a -
Iwaki Dosing Pumps, Iwaki Pumps
EZ Series 23.8 L / H @ 150 PSI
EZ series
solenoid metering pumps – Control: Start / Stop (ON / OFF)Electromagnetic Dosing Pumps – EZ Series
This economical version allows precise dosing at the lowest cost. Manual operation or simple on-off remote control for conventional liquid injections.
EZ pumps benefit from the major advantages of the range and bring precision and reliability.
Solenoid metering pump EZ – High frequency of injection
With its injection rate reaches 360 beats per minute dosage is more regular.Solenoid metering pump EZ – High accuracy
The accuracy of the flow rate is roughly 2%. Linearity is held within a range of plus or minus 3%. The frequency of injection is maintained at plus or minus 1%.Solenoid metering pump EZ – Compact
Ideal for integrators, pumps EZ series are small in size, lightweight and silent.Solenoid metering pump EZ – Double ball valve
The ball sets, seat and guide provide a complete seal and ensure the precision and good performance boot.Electromagnetic metering pump EZ – Long Membrane
The membrane, PTFE on EPDM is molded on a steel core. A membrane reinforcement minimizes flow variations if pressure changes.
SKU: n/a
