Shop
Showing 46–60 of 99 results
-
Iwaki centrifugal Mag drive pumps
Motor 1/2 to 5 HP Max. 852 L / min
The MX series, the first series to benefit from this latest innovation (international patent), comes in 10 models with flow rates up to 852 liters / minute and pressures up to 38 meters from Liquid Column.
Maximum capacity: Up to 852 L / min
Specialist and supplier of water treatment equipmentMX Magnetic Pump (-F) – Radial Flow Structure
The magnetic pumps in this series benefit from a new radial flow structure developed by IWAKI Co (international patent), which in conjunction with the principle of “contactless” and axle holding at the front and The rear, improves the life of the pump.
These technical innovations make it possible to resist abnormal operations such as cavitation and closed valve operation at discharge. The principle of the radial circulation of the magnetic pump offers a better circulation of the liquid around the shaft and the bearing thanks to the orifices located on the turbine and on the magnetic capsule which reduce the heat resulting from the friction of these elements. As a result, thermal deformation or melting is avoided.
MX magnetic pump (-F) – Body division (or volute) in 2 parts
This other innovation, developed by IWAKI Co (international patent), is based on the division of the body (or volute) into 2 parts (a front body and a rear body) forming a conical tangential chamber which guides the fluid towards the orifice of Refoulement. This improves performance by minimizing leakage inside the volute. Furthermore, all stressed parts of the magnetic pump (front and rear bodies, for example) are reinforced by ribs in order to improve their resistance to pressure and their mechanical strength.
SKU: n/a -
Iwaki centrifugal Mag drive pumps
Motor 15 to 100 HP Max. 4996 L / min
Magnetic pump MDW Series
Centrifugal pumps with magnetic drive
magnetic pump MDW – Long life and increased reliabilityMaximum capacity: Up to 4996 L / min
All parts in fluorinated resins are lined with metal. Only the reinforcement of the rear bowl is made of PPS reinforced with fiberglass to resist the strongest stresses. The use of ductile iron to reinforce the front body and the spacer allowed the use of the MDW series magnetic pump in petrochemicalsMagnetic pump MDW – High corrosion resistance
These magnetic pumps are manufactured mainly fluorine resin and CIS. Standard body in ETFE, PFA for products specific to the electronics industry.Magnetic pump MDW – Liquids preserved
Pure fluorinated resins used avoid contamination of fluids especially in the middle of the semiconductor. The use of PFA makes it possible to use it with liquids whose temperature can exceed 120 ° C.Magnetic pump MDW – Dismantling and Maintenance Simplified
Dismantling the rear of the magnetic pump allows audits and interventions without dismantling the piping. The wear parts (bearing, sleeve, stop) can be replaced individually without special tools.SKU: n/a -
Iwaki centrifugal Mag drive pumps
Motor 2 to 25 HP Max. 1325 L / min
MDM pumps are magnetic centrifugal pumps developed for a wide range of applications. The turbine in the volute (front body) is rotated by a magnetic force to transfer the liquid from the suction to the discharge of the pump. MDM pumps have excellent corrosion resistance, a long service life, high
safety and are used for pumping chemicals in different applications. Many chemicals can be transferred by these pumps.Maximum Capacity: Up to 1325 L / min
Specialist and supplier of water treatment equipmentInnovative, the Magnetic Pump series MDM brings notable progress in terms of comfort, safety of use and respect for the environment. It contributes to substantial savings due to its robustness and reliability by minimizing downtime and requiring little maintenance.
MDM Magnetic Pump – An Exclusive Mechanism for Preventing Dry Running
This magnetic pump is equipped with a device to avoid the effects of dry operation. The exceptional power of the magnets used (in rare earths) avoids contact of the magnetic capsule with the backstop and eliminates the risk of friction and heating due to melting of synthetic materials. This device achieves better resistance against dry running compared to traditional magnetic pumps.
Note: Only CF type magnetic pumps (with high density carbon bearings) can withstand dry operation. The latter is to be avoided in the case of parts of type KK (silicon carbide).Magnetic pump MDM – Components of extreme reliability
The front body ETFE is reinforced with carbon fibers for improved both strength and corrosion while the outer peripheral surfaces are reinforced with ductile iron to a more Long life.For the PFA MDM series, the ductile iron front body consists of a single piece coated with virgin fluorinated resin.
A new concept was adopted for the construction of the turbine. It is a “peg-fit” system that optimizes the axial maintenance of the turbine. Closed turbines are designed to ensure high efficiency. In addition, the rear body made of carbon-filled fluorine-containing resin is resistant to a pressure of 16 bar. It eliminates eddy currents and the production of sparks. Moreover, when dismantling for maintenance, any leakage of product proves impossible, the front and rear bodies being held in place by a flange. This advantage also contributes to respect for the environment.Magnetic Drive Pump MDM – release rear System (Pull-Back)
A special removal system is intended to facilitate maintenance of the magnetic pump. The interior of the unit can be easily inspected and parts can be replaced without disassembling the piping. This device is designed to prevent any leakage of liquid during the extraction of the motor assembly, spacer and magnetic drive
SKU: n/a -
Handheld Devices
Online Algae Detection Technology: EM 500, EM 400, EM 900
Online Algae Detection Technology
Eliminates Color & Turbidity Interference!
EM 500 – Online Chlorophyll-a Detection
EM 400 – Handheld Chlorophyll-a Detection
EM 900 – Handheld Chlorophyll-a + Colorimeter
Measures Living Chlorophyll-a
Ideal For Algae Dynamic Measurement of System
For Alarming or Algaecide Dosing Automation
- Easy deployment
- Interference resistant
- Minimal maintenance
4-20mA & Modbus RS485 Connection
Wireless CalibrationSmart Phone or Pyxis SP Units
Probe fouling diagnostics through PC
SKU: n/a -
FlowLine
pH/ORP Controllers
The Walchem Series pH/ORP on-line process controllers are designed for a broad range of industrial, commercial, and municipal water treatment applications. Walchem controllers are easily configured to accurately measure pH or mV (ORP) values from Walchem’s WEL and WDS differential combination electrodes, or any conventional combination electrode.
pH or ORP Measurement
Configurable via a software menu setting
Reduces inventory requirementsControl outputs can be set as high or low set points via keypad or touch screen. Auxiliary outputs can be set as:
High alarm, Low alarm, In-range output, Out-of-range alarm, Probe washProbe wash feature for applications that require frequent electrode cleaning, automatic probe wash stretches out reliable measurement life between maintenance interruptions
4-20mA Output internally powered and fully isolated, for connection to WebAlert, PLC or other devices
Software and electronics are constantly monitored without having to take the controller off-line
Auto buffer recognition software selectable for U.S. or European calibration standards
Self test menu simulates pH and temperature signals, allowing for quick diagnostics of sensor or controller problems
Differential pH
Walchem’s WEL pH/ORP sensors offer extremely reliable differential measurements immune to any ground loop problemsUSB Flashstick Support standard for data logs, event/relay and reset logs, and user configuration file import/export
Datalogging
Ethernet option for remote access via the Internet or LANSKU: n/a -
Controllers
Plating Controllers
Copper/Nickel Plating Controllers
Walchem’s WCU410 Copper Controller and WNI Nickel Controller are optoelectronic on-line analyzers that measure the actual concentration of copper or nickel in solution. They are used in a variety of applications including electroless plating baths and microetch baths (including oxide-replacement types).
Concentration Read in Units
- Selectable between grams per liter (g/L) or ounces per gallon (oz/gal).
- Backlit digital display also acts as a bar graph for a continuous “visual summary” of measurement versus set point.
Concentration set point, alarm set points (high and low), dead band and pump on time are all easily adjustable.
- An interlock feature allows external devices (such as a flow switch ) to interlock control relays.
Download stored data from the controller to a USB stick. Use the data to simply and easily validate system performance. The data and event logs show copper or nickel values, as well as accumulated chemical feed and relay activation times.
Four Separate Control Relays & Outputs (WCU )may be used to add copper, caustic, formaldehyde or chelator/stabilizer chemistries.
- Each output has a replenishment totalizer which may be set in units of time or volume.
Optional pH Input Board (WNI) may be used to add pH adjustment chemistry.
– Output has a replenishment totalizer which may be set in units of time or volume.SKU: n/a -
Blue Peristaltic Pumps, Blue White, Industries Ltd.
Pompe péristaltique AV4
Peristaltic / dosing pump / for high viscosity / robust liquid
Max. Flow: 158 GPH (600 LPH)
- Max. 125 psi | Flex-Pro® A2 series
- 4-20 mA, pulsed input and manual speed control
- Optional Modbus, Profibus, Industrial Ethernet
- 2500: 1 Coverage Ratio
- Variable speed DC motor
- NEMA 4X (IP 66) Washdown Duty
- 2 years warranty
- NEW! Flex-A-Prene® 4X plus tube life.
- Patented tube failure detection
SKU: n/a -
Uncategorized
Pools and Spas Controllers
Walchem controllers are designed to control your chemical programs for pools and spas. Accurate readings of the chlorine level in water. Accurate reading of pH and temperature, and optionally, the conductivity PPM levels for the TDS or the salt concentration in the water for the salt systems. Different controllers are available to control the various chemical products; liquid chlorine, pellets or salt system. For the PH control output, you have the choice of the metering pump or CO2 valve.
Some models can be connected to the Internet and send remote alarms, data acquisition files. You can connect online directly on your controller like you were there. V-Touch integrates these centralized controllers on their platform. Everything becomes easier and gives you unparalleled performance.
Our customers have the most accurate and durable installations, we can reduce the cost of chemical programs through precise control of Walchem pH, PPM and conductivity sensors. We can send text messages or emails if the parameters are outside the required limits. We can save the water quality data and obtain specific documents to confirm that your facilities are within the standards set by the various government regulations.
We manufacture several standard systems for our/your customers. These systems are only available through our authorized resellers or exclusive clientele in Quebec and are offered to everyone outside of Quebec (Canada). Our complete systems are targeted for any customers with an offer from a competitor product other than Walchem and Iwaki products.
Established clientele:
- Swimming pools and relaxing spas, condos and residential
- Schools and Universities
- Residential spas and high end spas
- Commercial
- Municipal
- Aqua parks
- Fountains
Premium quality systems at affordable prices to suit your budget and preferences.
- Economic System – pH and ORP reading or PPM + metering pump control or salt system
- Complete system – pH and ORP reading or PPM + metering pump control or salt system + remote access with acknowledgment of alarms if the controller is online, V-Touch.
– Advance system – pH reading, PPM reading, + conductivity reading, metering pump control or CO2 or salt system + remote access with acknowledgment of alarms if the controller is online, V-Touch.
SKU: n/a
