Horizontal magnetic drive centrifugal pumps
flow 65 GPM (246 LPM) / Heads to 165 feet (50 meters)
Cut:
|
| Construction materials: | ||||
| Volute: | 316SS | “O” -ring: | Viton (STD) Teflon, Buna, EPR, Neoprene, Kalrez, Flouro-Silicon | |
| Support: | 316SS | Sockets: | Carbon (STD), silicon carbide | |
| Tree: | 316SS (STD), in Coated tungsten carbide |
Thrust washers: | Ceramic (STD), silicon carbide | |
| Rotor: | 316SS | Cup Magnet: | 316SS | |
| Fasteners: | 316SS | |||
| * Consult factory for other options | ||||
| Technical informations | ||||
| HP75MD | HP100MD | |||
| Recommended Minimum Throughput – GPM (LPM) | 02.01 (1.9) | 02.01 (1.9) | ||
| Max. Operating pressure – psi (bar) | 300 (20) | 300 (20) | ||
| Solid maximum Size – inch (mm) | 0.03 (0.7) | 0.03 (0.7) | ||
| Max. Temperature – ° F (° C) | 350 ° F (177 ° C) | 350 ° F (177 ° C) | ||
| (Solids are not recommended for Mag Drive Pumps) | ||||
Applications:
- Industry process -CHEMICAL, demineralized water, wastewater, refrigerants and corrosive fluids
- OEM -Washers, filters, chillers, cooling towers, scrubbers, plating equipment
- Agriculture acid fertilizer and other agricultural chemicals
Characteristics:
- Carbon Standard Sockets Graphite
- Optional sleeves-Alpha silicon carbide (tungsten carbide coated shaft reguired)
- Tungsten carbide optional coated shaft
- Standard NEMA 56C motors
- Magnet-samarium cobalt
Related products
-
Uncategorized
101M
These pump housings and mounting brackets are made of cast aluminum or bronze alloy. The rotor is made of stainless steel with a hard chrome plate to improve the wear properties. The stator is manufactured from molded Nitrile. The mechanical seal is a carbon and ceramic mechanical rotating face type for a positive seal.
SKU: n/a -
-
Uncategorized
Boiler Controllers
Boiler Water Controllers and Condensate Monitors
Walchem’s Boiler Controllers and Condensate Monitors have all the standard features you’d expect in conventional boiler controllers plus simple-to-use information management tools that enable water treatment professionals to deliver more effective service to their customers.
Choice of measurement units (uS or PPM) (°F or °C)
4 chemical feed options
Feed & Blowdown simultaneously
Feed after blowdown or as % of blowdown time
Feed as % of time elapsed
Feed as % of make-up waterChoice of blowdown modes for timed samples
Detects flashing during timed samples
Automatic temperature compensation
Self-diagnostics
Software, electronics, and sensor are constantly monitored without having to take controller offline.USB flashstick support for datalogs/event logs and user-configuration file import/export.
Datalogging
Ethernet option for remote access via the Internet or LANSKU: n/a -
Uncategorized
W100 wall mount Controller
Plug into more options in water treatment control!
Three powerful control outputs make the Walchem W100W a more versatile, high value choice among entry level water treatment controllers.
The W100W series provide an economical and reliable way to keep your water treatment program under control.Key Features:
- Large display with icon based programming makes setup easy
- Universal sensor input provides extraordinary flexibility; the same controller can be used with almost any type of sensor needed
- Multiple language support allows simple setup no matter where your business takes you
- Three control outputs allow the controller to be used in more places than other entry level models
- Complete flexibility in the function of each relay
- On/Off Setpoint
- Time Proportional Control
- Pulse Proportional Control (when purchased with solid-state rel ays)
- In-range or Out-of-range activation
- Timer-based activation
- Activation based upon the state of a contact closure
- Timed activation triggered by a Water Contactor or Paddlewheel flow meter’s – accumulated total flow
- Activate with another output
- Alarm
Typical Applications:
- Wastewater neutralization & disinfection
- Food and Beverage disinfection
- Potable water treatment
- Swimming pools & spas
- Boiler water treatment control
- Cooling tower biocide control
- Metal finishing & printed circuit board
- Irrigation & fertigation
- RO Systems
- Condensate water treatment control
SKU: n/a -
Uncategorized
Pools and Spas Controllers
Walchem controllers are designed to control your chemical programs for pools and spas. Accurate readings of the chlorine level in water. Accurate reading of pH and temperature, and optionally, the conductivity PPM levels for the TDS or the salt concentration in the water for the salt systems. Different controllers are available to control the various chemical products; liquid chlorine, pellets or salt system. For the PH control output, you have the choice of the metering pump or CO2 valve.
Some models can be connected to the Internet and send remote alarms, data acquisition files. You can connect online directly on your controller like you were there. V-Touch integrates these centralized controllers on their platform. Everything becomes easier and gives you unparalleled performance.
Our customers have the most accurate and durable installations, we can reduce the cost of chemical programs through precise control of Walchem pH, PPM and conductivity sensors. We can send text messages or emails if the parameters are outside the required limits. We can save the water quality data and obtain specific documents to confirm that your facilities are within the standards set by the various government regulations.
We manufacture several standard systems for our/your customers. These systems are only available through our authorized resellers or exclusive clientele in Quebec and are offered to everyone outside of Quebec (Canada). Our complete systems are targeted for any customers with an offer from a competitor product other than Walchem and Iwaki products.
Established clientele:
- Swimming pools and relaxing spas, condos and residential
- Schools and Universities
- Residential spas and high end spas
- Commercial
- Municipal
- Aqua parks
- Fountains
Premium quality systems at affordable prices to suit your budget and preferences.
- Economic System – pH and ORP reading or PPM + metering pump control or salt system
- Complete system – pH and ORP reading or PPM + metering pump control or salt system + remote access with acknowledgment of alarms if the controller is online, V-Touch.
– Advance system – pH reading, PPM reading, + conductivity reading, metering pump control or CO2 or salt system + remote access with acknowledgment of alarms if the controller is online, V-Touch.
SKU: n/a
