{"id":2634,"date":"2016-07-14T00:06:23","date_gmt":"2016-07-14T00:06:23","guid":{"rendered":"http:\/\/preview.chemtechautomation.com\/controllers\/instruments-de-mesure-des-niveaux-flowline\/"},"modified":"2020-06-05T19:49:57","modified_gmt":"2020-06-05T19:49:57","slug":"instruments-de-mesure-des-niveaux-flowline","status":"publish","type":"page","link":"https:\/\/chemtechautomation.com\/en\/instruments-de-mesure-des-niveaux-flowline\/","title":{"rendered":"Measuring instruments Flowline"},"content":{"rendered":"

<\/p>\n

EchoPod DL series<\/h3>\n

DL-10 – 49.2 “(1.25m)
\nDL-14 – 49.2 “(1.25m) + 4 relay outputs
\nDL-24-9.8 ‘(3m) + 4 relay outputs
\nDL-34 – 18.0 ‘(5.5m) + 4 relay outputs
\nUltrasonic Transmitters: continuous level measurement with 4-20 mA signal output and can be configured via the free WebCal software available on the official Flowline website. This non-contact liquid level sensor is ideal for corrosive, sticky or dirty liquids. They are widely selected for applications, small day tank, cistern tank treatment and much more.
\n<\/p>\n

Pulse Radar Level Transmitter<\/h3>\n

Pulse radar level transmitter provides continuous measurement with a 4-20 mA output signal, and is configured via its integrated push button display module. Non-contact liquid level sensors are intended for chemical storage applications or water or tanks made of reinforced concrete or tanks of any material.
\n<\/p>\n

FloaTek<\/h3>\n

Available in CSA approved or general purpose, explosion-proof configurations, the transmitter provides level measurement up to 6 ‘(1.8m), and is designed for high temperature and \/ or pressure applications. Built with solid stainless steel, hazardous level measurements have become simple.
\n<\/p>\n

DataPoint Advanced Panel Meter<\/h3>\n

DataPoint provides display for a tank, automation for pump control and a signal repeater. Available in 3 configurations, display only for indication, display with 2 relays and display with 4-20 mA signal repeater.
\n<\/p>\n

MicroPoint Multi-Channel<\/h3>\n

MicroPoint provides multi reservoir indications, volumetric alarms and linearization of tanks. Offered in 2 or 4 channel configurations, the indicator provides a simple interface for your ultrasonic probes.
\n<\/p>\n

EchoPump Ultrasonic Level Pump Controller<\/h3>\n

EchoPump provides non-contact level measurement up to 33 ‘(10m) with advanced display, tank shape linearization and 5 relay control channels. Automation devices include pump duplexing and fail safe logic. Measurement and level control are made simple.
\n<\/p>\n

Switch-Tek Mini-Float Level Switch<\/h3>\n

The minis float vertical and horizontal all uses are level switches offered in PP or PVDF with a contact closure for the PLC, the SCADA or the alarm interface. Level switches are generally chosen for less critical applications with clean solutions such as water or chemicals.
\n<\/p>\n

Switch-Tek Non-Intrusive Capacitance Level Switch<\/h3>\n

The non-intrusive all-purpose capacitance level switch detects liquid through the non-metallic walls of the tanks with a relay for the PLC, SCADA or alarm interface. The level switch is more suitable for corrosive or ultra pure liquids.
\n<\/p>\n

Thermo-Flo Liquid and Gas Flow Switch<\/h3>\n

The minis float vertical and horizontal all uses are level switches offered in PP or PVDF with a contact closure for the PLC, the SCADA or the alarm interface. Level switches are generally chosen for less critical applications with clean solutions such as water or chemicals.
\n<\/p>\n

Flow Switch Remote Relay Controller<\/h3>\n

The all-purpose remote controller accepts 2 sensor inputs with 2 relay outputs for pump protection or low flow detection. The controller installs on a 35 mm rail with our liquid or gas flow switch probes. The remote protection of the pumps is made simple.
\n<\/p>\n

EchoSpan<\/h3>\n

EchoSpan is the solution for ultrasonic level measurement for atmospheric storage tanks up to 32 ‘(10m) including large tanks, daily tanks or water treatment tanks. Calibration is fast and simple with our simple scrolling layer menu, three button for interface and 6-segment liquid crystal display.
\n<\/p>\n

EchoTouch<\/h3>\n

CSA approved for use in hazardous areas, the non-contact level transmitter is ideal for measuring large atmospheric capacity reservoirs, daily tanks and water treatment tanks up to 18 ‘(5.4m ). Compact and very solid, the configuration is reliable and easy to make. This is easy control in hazardous areas.<\/p>\n

Ask your devi<\/h3>\n
\n
\n
\n
\n
\n<\/p>\n

Your Name (required)
\n<\/span>
\nYour Email (required)
\n<\/span>
\nSubject
\n<\/span>
\nYour Message
\n