Iwaki Air, Pompe à air Iwaki
1/2″ TC-X152 Series
The TC-X152 pump is designed to offer exceptional flow rates, high chemical reistance, improved leak prevention and increased reliability. The TC-X152 series offer excellent flow rates, low air consumption and solids handling capabilities.
The TC-X152 pump is designed to offer exceptional flow rates, high chemical reistance, improved leak prevention and increased reliability. The TC-X152 series offer excellent flow rates, low air consumption and solids handling capabilities. Featuring new Looped C™ Air Motor Technology (patent pending). |
|
| Maximum Flow Rate: 15.8 GPM (60 LPM) | |
| Maximum Discharge Head: 230 FT (70 m) | |
| Available in: Stainless Steel, Aluminum, Pure Polypropylene & PVDF | |
| Spool Valve type: C-Spring valve |
Specifications |
||||||
| Material Code: | A”X” | S”X” | P”X”-PP | V”X” | DT | |
| Max Flow Rate: | 15.8 GPM (60 LPM) | 14.8 GPM (56 LPM) | ||||
| Max Operating Pressure: | 100 PSI (0.7 MPa) | |||||
| Max Air Consumption: | 31.8 scfm (900 L/min) | |||||
| Supply Air Pressure Range: | 30 to100 PSI (0.2 to 0.7 MPa) | |||||
| Liquid Discharge Volume per Cycle: | 2.9 oz (85 ML) | |||||
| Connection Size (Suction x Discharge): | NPT 1/2″ | |||||
| Weight: | 9.0 lbs (4.1 kg) |
14.8 lbs (6.7 kg) |
6.8 lbs (3.1 kg) |
9.3 lbs (4.2 kg) |
8.4 lbs (3.8 kg) |
|
| Pump Body Material Code: P-Pure Poly A- Aluminum S-Stainless Steel V-PVDF (Kynar®) D-Polyoxymethylene (Acetal) |
“X” Diaphragm material options: T-PTFE (Teflon®) H-TPEE (Hytrel™) C-CR (Neoprene™) N-NBR (Buna) S-TPO (Santoprene®) E-EPDM (Nordel) |
Teflon®, Hytrel®, Neporene™ are registered trademarks of DuPont
Santoprene® is a registered trademark of Exxon
Kynar® is a registered trademark of Archema
